Zero Escape ZTD: Pod Room

Full video walkthrough guide


Pick up the note on the floor.

The Pod Room is one of the most confusing room with lots of puzzles everywhere. It is best to view the video walkthrough for step by step guide.

Open the locker with the hammer in it. Picture guide on what is the final solution for the locks

The room is actually divided into 3 section. Use the hammer to hit the red circles in the following order:

  • Left circle (1st section)
  • Bottom circle on the edge (1st section)
  • right circle (1st section)
  • Circle on the edge (2nd section)
  • right circle (1st section)

On the current screen, you can see a lock on the top of the room. Keep hitting the circle to rotate the room to the right (clockwise) so that you can get to this screen below.

Get the driver tip first.

Open the locker with the huge screwdriver in it. Picture guide on what is the final solution for the locks

After removing the huge screwdriver, you can see there is another locked drawer below the dart like board.

Get the Zero Doll Picture

Combine the huge screwdriver with the driver tip. Use it on the bottom driver and you will need to solve the minigame. The purpose of this is to make the middle number zero. Red number is add on and blue is subtract. You fail if the number falls below 0. Solution below is the order of the directional pad.

  • 1st circle: L > L > R > L > R > L > L > L
  • 2nd circle: L > L > L > L > L > R > L > L > L > R
  • 3rd circle: L > L > L > L > L > L > R > R > R > L

Insert the big screwdriver into the machine that just came up. Turn the room so that all the green lines are matching on the bottom floor. Slight the last section first then slowly turn to align the 2nd and 1st section.

The monitor will slide up and now you need to unlock the puzzle. This one involves a lot of steps so please refer to the video guide on the solution. You need to get the puzzle looking like this:

Shoot the red pod button to break the glass and then press it.

Leave a comment